MR2 AW11 Engine bay

Click to zoom

Below: one way to put in a intercooler (photos from a similar MR2) – both intercooler ends pointing to the right. Stock piping is going to be removed and intake manifold swapped.


My MR2:


Below: width from the left side of the engine bay to the engine, approx. 400mm


Below: opening length, 400mm


Below: stock intercooler width 300mm


Below: stock intercooler length 320mm


Below: stock intercooler height 80mm


Below: length of the straight ic pipe, approx. 70mm


Below: bent ic pipe, length approx. 70mm


Below: length of the engine bay below opening level, approx. 550mm (from battery holder to rear wall)