Clutch line and LSD

Couldn’t find this info anywhere, so I measured it myself. The thread at the end of the clutch line is M12 x 1 andpipe diameter is 6,3mm. The pipe diameter is actually 6mm. It’s really difficult to get measurements from the pipe because it is so bent in every direction.

Here’s the thread, bit lousy picture as I took it with my cell phone

Part of the clutch line – the line from slave cylinder

And the master cylinder – mainly the thread

Here’s the LSD with SW20 LSD speedo gear. I was worrying the fitment, but it was ok and there was only one way to fit it on the LSD. Now, we have all the parts to build the gearbox again.