Critical things missing – copied from earlier post
- Cam followers (1SZ-FE solids. Currently measuring clearances)
- Intake + throttle body (intake is being made OR adapter for small port intake)
- Wiring loom (nope, nothing done yet)
- Intercooler (stock one wont do. Must order that A2W (AVT Chargecoolers?))
- Trigger wheel (Mr. 4WD Toyota guy from next door is making me one)
- Edit: Oil filter relocation parts
Non-critical things missing
- CAN Bus wires for the ecu (found something interesting for this)
- New plugs (maybe, I got iridiums both on my current and spare engine)
- Clutch plate (maybe, no idea about the current condition)
- Fuel system (hoses, etc.) ethanol compatible
- Cam gears (maybe later and maybe toda. HKS Camshafts work with stock ones)
- Rear motor mount + damping?
- Shift lever bushing? (what was this?)
- Titanium axle bolts 🙂
- Silicone coolant hose kit
- Engine bay coolant bleeder screw
Stuff that needs to be done
- Coatings for pistons, turbo and ext. mani (In progress)
- Cleaning block
Done list
- Cleaning cylinder head (Done! Found out that Aluminum boat cleaner works well (Oxalic acid))
- Injectors + connectors (Done! EV14 714cc with ethanol compability)
- Ethanol compatible fuel pump (Done! AEM)
- Cam covers (Done! Powdercoated)
- Crank bearings (Done! Friction reducing coating)
- Conrod bearings (Done! Friction reducing coating)
- Exhaust and downpipe (Done!)
- Head gasket (Done, Cometic)
- New pistons (Done, Matrix Garage/Arias/Traum pistons)
- Gear shifter that small bearing that is at the side of the shifter (Done! Matrix Garage)
- Gear shifter bearings (Done! Matrix Garage)
- Shift base bushings (Done! Matrix Garage)
- 2-component silver paint for the epoxy painted parts (Done, tried new type of 2K paint)
- Fuel pressure regulator (Done, kinda, it seems to be missing parts 😀 )
- Crank wheel/harmonic balancer (Done, I found a aluminium one from my stash)
- Rear tie rods (Done, Matrix Garage)
Uncertain
- Idle air valve (uncertain)
- Turbo hardware kit (uncertain)
- Aluminium radiator
Leave a Reply