Non- and critical things missing (part 5)

Critical things missing – copied from earlier post

• Cam followers (1SZ-FE solids. Currently measuring clearances)
• Intake + throttle body
  • Plan A – custom intake is being made
  • Plan B – Techno Toy Tuning adapter ordered for smallport intake
• Wiring loom (the stock wiring of the maxxecu is very long – not sure if anything serious needs to be done)
• Intercooler (stock one wont do. Must order that A2W (AVT Chargecoolers?))
• Trigger wheel
  • Plan A – ordered from Techno Toy Tuning
  • Plan B – next door Toyota guy makes one
• Oil filter relocation parts
• IAT sensor + connector
• CLT sensor + connector
• TPS sensor + connector

Non-critical things missing

• New pulleys (ordered from TTT, now waiting)
• CAN Bus wires for the ecu (found something interesting for this)
• New plugs (maybe, I got iridiums both on my current and spare engine)
• Clutch plate (maybe, no idea about the current condition)
• Fuel system (hoses, etc.) ethanol compatible
• Cam gears (maybe later and maybe toda. HKS Camshafts work with stock ones)
• Rear motor mount + damping?
• Shift lever bushing? (what was this?)
• Titanium axle bolts 🙂
• Silicone coolant hose kit
• Engine bay coolant bleeder screw
• Flex fuel sensor

Stuff that needs to be done

• Cleaning block (in progress)

Done list

• Coatings for pistons, turbo and exhaust manifold (Done!)
• Cleaning cylinder head (Done! Found out that Aluminum boat cleaner works well (Oxalic acid))
• Injectors + connectors (Done! EV14 714cc with ethanol compability)
• Ethanol compatible fuel pump (Done! AEM)
• Cam covers (Done! But doing then better this time)
• Crank bearings (Done! Friction reducing coating)
• Conrod bearings (Done! Friction reducing coating)
• Exhaust and downpipe (Done!)
• Head gasket (Done, Cometic)
• New pistons (Done, Matrix Garage/Arias/Traum pistons)
• Gear shifter that small bearing that is at the side of the shifter (Done! Matrix Garage)
• Gear shifter bearings (Done! Matrix Garage)
• Shift base bushings (Done! Matrix Garage)
• 2-component silver paint for the epoxy painted parts (Done, tried new type of 2K paint)
• Fuel pressure regulator (Done, found the missing parts 😀 )
• Crank wheel/harmonic balancer (Done, I found a aluminium one from my stash)
• Rear tie rods (Done, Matrix Garage)

Uncertain

• Idle air valve (uncertain)
• Turbo hardware kit (uncertain)
• Aluminium radiator
• Knock sensor system (plex or that other one…)