There is still a little bit to do with the Tein. For the rear, I dont have any kind of camber adjustment, but that can be fixed with SW20 camber adjusting bolts. For the front, I’ve been thinking something similar.
Ive got the measures for the front camber adjustment cam somewhere and based on those, it is possible to use SW20 camber adjustment bolts in front hubs too, but only in the upper bolt hole. Some of the parts need to be done in lathe, but that shouldnt be a problem.
Also, that 2mm shim plate is not as elegant as it could be. I might revisit it later.
Leave a Reply