Back to the Tein SW20 to AW11 swap

Ok, it seems that I need to address the front strut/knuckle bolts and shim-spacer-whatever again. I had a bit thicker spacer that really was needed and still the upper bolt had moved a bit. This time im pretty sure that the AW11 front knuckle bit that attaches to strut bottom is 26mm thick and SW20 has a 28mm thick bit. I had a 2.2mm thick shim and, well… it needs a redesign 🙂

IMG_20160417_192034

Leave a Reply

avatar
  Subscribe  
Notify of