Toyota E51 gearbox info – bearings

Ok, in this post I will list some gearbox bearings and some info about them

These bearings are for the both ends of the diff. All of them are for 4A-GZE + E51 combo, but some were used in SW20 gearboxes.

Edit 1: Fixing some mistakes + noticed that all of these arent from 4A-GZE + E51

Edit 2: Of course, my info is not to be trusted. Always doublecheck.

Edit 3: (18th Sep 2018) I don’t sell bearings. The list here is to make connection between different manufacturers and Toyota part numbers.

Differential bearings:

• 90368-44002
  • Used in 3SGE automatic
  • LH bearing

• 90366-44001
  • Used in 3SGE automatic
  • RH bearing
  • NACHI 44KB721
  • Used between 86-89
  • 
  • ID 44mm, OD 72mm, WD 22mm

• 90368-40016
  • Used in 4AGZE
  • LH bearing 4AGZE
  • Discontinued

• 90368-40003
  • Used in 4AGZE
  • RH bearing 4AGZE
  • Discontinued

• 90366-40064
  • Used in SW20 3SGE, probably S54 gearbox
  • NACHI 40KB681A1
  • 
  • ID 40mm, OD 68mm, WD 22mm

• 90366-40023
  • Used in SW20 3SGE, 3SFE and 5SFE, probably S54 gearbox
  • RH bearing

• 90366-40016
  • Used in SW20 3SGE, probably S54 gearbox
  • KOYO TRA080702
  • 
  • ID 40mm, OD 68mm, WD 22mm

• 90366-50014
  • Used in 4AGZE and 3SGTE
  • LH bearing 4AGZE
  • KOYO TR100902D-2-N
  •  
  • ID 50mm, OD 90mm, WD 21mm

• 90366-57006
  • Used in 4AGZE
  • RH bearing 4AGZE 86.8 – 87.2

• 90366-57016
  • Used in 4AGZE
  • RH bearing 4AGZE 87.3 – 89.11

• 90368-40002
  • Used in  SW20 3SGE, probably S54 gearbox
  • KOYO 57390AN
  • ID 40mm, OD 68mm, WD 22mm

• 90366-57001
  • Used in 3SGTE, maybe in 4AGZE too.
  • RH bearing
  • KOYO ST5791
  • 
  • ID 57mm, OD 91mm, WD 20mm
  • NACHI 57KC911
  • 
  • ID 57mm, OD 91mm, WD ??mm
  • PFI PST5791
  • 
  • ID 57mm, OD 91mm, WD 20mm

Output shaft front bearing:

• 90365-33003
  • Used between 86.8-89.11
  • Used in both 4AGZE and 4AGE
  • KOYO KNU070618
  • KOYO RNU070618
  • (Difference?)

• 90366-32002
  • Used between 86.8-89.11
  • Used in 4AGZE
  • NACHI 32KB742
  • 

Output shaft rear bearing:

• 90366-28002
  • Used between 86.8-89.11
  • Used in 4AGZE
  • NACHI 28KC692
  • 
  • ID 28mm, OD 69mm, WD 21.3mm
  • PFI P28KC692

• 90366-28007
  • Used between 86.8-89.11
  • Used in 3SGTE, but is also listed for 4AGZE. Size difference, possible error?
  • NACHI 28KC695
  • 
  • ID 28mm, OD 69mm, WD 25mm

Input shaft front bearing:

• 90365-25021
  • Used between 84.6-89.11
  • Used in 4AGE + C5x
  • KOYO RNU050415A
  • 
  • ID 25mm, OD 43.5mm, WD 15mm

• 90365-30023
  • Used between 86.8-89.11
  • Used in 4AGZE and 3SGTE
  • NACHI 30RJ5852
  • 
  • ID 38mm, OD 58mm, WD 20mm

Input shaft rear bearing:

• 90363-25027
  • Used between 84.6-89.11
  • Used in 4AGE?
  • KOYO DG2568-HNSH2-C3
  • 
  • ID 25mm, OD 68mm, WD 19mm

• 90363-33005
  • Used between 86.8-89.11
  • Used in 4AGZE
  • NSK 33TM01NXC3
  • SKF 6307VSP33
  • PFI P33TM01NXC3
  • 
  • ID 33mm, OD 80mm, WD 19mm

• 90363-33007
  • Used in 3SGTE, might work in 4AGZE (upgrade?)
  • NSK 33TM01U40AX
  • 
  • ID 33mm, OD 80mm, WD 19mm